LED Strip Lights
Mono 2835-120L LED Strip
Single-colour strip, 120 LEDs/m, 8 mm or 5 mm
The 2835-120L is the standard single-colour strip for coves, pelmets and profiles: 120 LEDs per metre, 12 W/m and about 1100 lm/m. It comes on an 8 mm board for general use and a 5 mm board for the narrowest profiles and joinery slots. At this density it reads as a continuous line behind an opal diffuser at normal profile depths.
Variants
Two board widths, 8 mm and 5 mm, each in 12 V or 24 V. 3000, 4000 or 6000 K, CRI above 80, SDCM below 6. Cut every 5 cm at 24 V (2.5 cm at 12 V on the 5 mm board). Prefer 24 V for longer runs, since voltage drop is lower.
Applications
- Ceiling coves: The default cove strip; section and setback are in cove lighting details.
- Wardrobes and shelving: The 5 mm board in slim shelf profiles.
- Pelmets and curtain pockets: A soft wash down the fabric.
Specification
| Code | Voltage | Power | Flux | PCB width | Cut interval | Colour |
|---|---|---|---|---|---|---|
| JM-2835-120L (8MM) | 12 V / 24 V | 12 W/m | 1100 lm | 8 mm | 5 cm | 3000 / 4000 / 6000 K |
| JM-2835-120L (5MM) | 12 V / 24 V | 12 W/m | 1100 lm | 5 mm | 5 cm (24 V) · 2.5 cm (12 V) | 3000 / 4000 / 6000 K |
Used in
Related products
Specify Mono 2835-120L LED Strip on your project
JMAP Solutions supplies and installs this product across Odisha and eastern India, with layout, mock-up and commissioning support for design teams.