LED Strip Lights
SPI Addressable LED Strip
Pixel strips for chasing and animated effects
SPI addressable strips have control chips along the board, so segments can be lit individually: light can run, chase, fade along a line or follow music. Three versions cover RGB pixels, RGB plus white pixels, and a white-only strip with flowing effects. They need an SPI pixel controller and careful power injection, and are a different discipline from static strips.
Variants
P5050-60L RGB: 12 V, 14.4 W/m, one chip per 3 LEDs (WS2811), cut every 10 cm. P5050-60L RGB + 3000 K: 12 V, 14.4 W/m, one chip per 3 LEDs (WS2814), cut every 5 cm. P2835-180L white 3000 K: 24 V, 16 W/m, one chip per 15 LEDs (UCS1903), CRI above 80. All on 10 mm boards.
Applications
- Staircases: Step-by-step running light triggered by sensors.
- Bars, lounges and gaming rooms: Animated colour on ceilings and counters.
- Feature ceilings and facades: Flowing white or colour along long lines; data planning is in DALI and DMX control protocols.
Specification
| Code | Voltage | Power | Flux | PCB width | Cut interval | Colour |
|---|---|---|---|---|---|---|
| JM-P5050-60L (RGB) | 12 V | 14.4 W/m | 10 mm | 10 cm | RGB pixel | |
| JM-P5050-60L (RGB+W) | 12 V | 14.4 W/m | 10 mm | 5 cm | RGB + 3000 K pixel | |
| JM-P2835-180L | 24 V | 16 W/m | 10 mm | not printed | 3000 K pixel |
Related products
Specify SPI Addressable LED Strip on your project
JMAP Solutions supplies and installs this product across Odisha and eastern India, with layout, mock-up and commissioning support for design teams.